Photon Lines UK

Optical Components 

Scan Head-8306A 2D laser scan control system consists of a scan head, F-θ lens bracket, two axes TS8306A scanner, mounting flange and 25-pin electric connector, with an input aperture ranging from 8mm to 10mm, for a range of wavelengths and power densities.

Scan Head-8306A 2D laser scan control system is designed for ultra-high speed precision static marking and marking-on-the-fly. With its ultra-compact design, Scan Head -8306A features a temperature stabilized, high precision, ultra-fast response and superior performance. Moreover, Scan Head-8306A may be used with either 8mm or 10mm aperture mirrors.

Typical applications:

Parameters of  2D laser scanner control system

All angles are in degrees and all parameters apply with the servo driver after a 60second warm-up

Input Voltage Requirement: ±24V±10% (The same absolute-value)

Small Angle Step Response(±0.5V Waveform):

                                                               0.4ms(Aperture:8mm);

                                                               0.5ms(Aperture:10mm)

Effective Scan Angle:                            ±15°

Position Signal Input Scale Factor         .5V／°

Position Signal Output Scale Factor       0.5V／°

Analog Position Signal Input Range        ±10V/±5V (Optional)

Linearity                                                  99.9%, range±20°

Scale Drift                                               40PPM/℃, (Max)

Zero Drift                                                10μRad./℃, (Max)

Repeatability                                            8μRad.

Long Term Drift Over 8 Hours                 ＜0.5m Rad.

Average Current                                     1A（Max）

Weight Without Objective                        2.2㎏

Operating Temperature Range                0℃~40℃