Novacam 3D Fiber profilometer

 PDF Print E-mail

Optical Measurement Systems

 

Novacam 3D Fiber Profilometer µCamNovacam_MicroCam-3D_profilometer_02.jpg

 

µCam-3D enables micron precision, optical non-contact, high speed surface profiling detection, which can measure roughness, film thickness and obtain cross sectional measurements. It is based on low coherent interferometry.

 

µCam-3D is used for :

  • 3D surface mapping and metrology
  • Mapping inside small diameter tube
  • Non-destructive testing
  • Surface inspection and roughness measurements
  • Small diameter hole depth measurement
  • Cross section imaging 

Industry specific applications:
  • Semiconductor and electronics industry
  • Aerospace industry
  • Casting applications
  • Optical industry: Etching and deposition measurements for waveguides
  • Inspection of optical components
  • Forensic applications : bullet shape, cartridge, gun barrel inspection
  • Glass industries thickness measurements
  • Plastic industry: rheometry measurements
  • Fuel cell metrology
 
Key Benefits
  • Small fiber based probe
  • High resolution
  • Inhospitable environment
  • Insensitive to the environment lighting
  • Possible large standoff distance from the probe
  • Measurements possible far from detector enclosure
  • Advantage over triangulation sensors – does not need the angle between sensor and light projection 
 
Click on the following for further information pdf Novacam_uCam-3d-08 578.39 Kb